PCC PANEL / POWER CONTROL CENTRE
PCC Panels are required for the main low voltage (415V) power receiving from the transformer/generating set or from the solar power plant, further, it distributes the power to the required electrical load. It is fitted with a variety of switchgears with ratings of incoming sources and outgoing loads. Busbars are used for the interconnections of the switchgears. Proper arrangement for incoming and outgoing cable terminations. Mostly these are indoor types, but for specific requirements, it can be an outdoor type.
The price of a PCC Panel shall be derived through proper design and detailed engineering. The item is manufactured to a customised design.
Specifications
| Purpose of CCP (Capacitor Control Panel) | Main Power Receiving from Transformer or DG Sets and Distribution to Required Load from Substation |
| Voltage | 415V AC |
| STR | As per Transformer of Client's Requirement |
| Current Rating | Up to 6300A |
| Reference Standard | IS/IEC 61439 |
| Maximum Transporting Length | 2000 mm |
| Ingress Protection (IP) | 52 to 55 |
| Busbar Material | Aluminium or Copper (as per client's requirement) |
| Busbar Insulation | Air Insulated |
| Cubicle / Enclosure Material | CRCA / Aluzinc / GP Sheets |
| Sheet Thickness | Main Body 2.0 mm and Partitions 1.5 mm |
| Painting | Powder Coating thickness between 60-80 microns |
| Wiring | Copper Flexible wires as per rating required with sleeved lugs, number ferules, phase colour coding |
